| Remove toilet seat. Position the hole at the end of the support bracket (1) on top of the left hole of the toilet bowl where the seat attaches. Insert the threaded brass tube (2) through the support bracket hole and the left hole of the toilet bowl where the seat attaches . From underneath the toilet bowl, place metal washer (3) and nut (4) on the threaded tube to secure the unit in position. Push the unit lever in all the way, to center the shower head of the spout in the middle of the toilet bowl. Find the position of the Bidematic where the shower head will be in the middle of the bowl when in use and under the rim when recessed. Also, the movable spout should not rub against the rim. Then tighten nut (4) onto the threaded brass tube (2). Also tighten the nut (5) that fastens the support bracket (1) to the main body of the unit. Make sure to keep the Bidematic in the proper position while tightening the nuts. Do not over-tighten the nuts. Place the plastic washer (6) on top of the right hole of the toilet bowl where the seat attaches. Reattach the toilet seat with the original bolts and nuts (one bolt goes through the threaded brass tube (2) and the other one through the plastic washer (6)). |
